3 Tricks for Applying Asset Tags That Stick For Years

Posted on April 7, 2016 by Admin

Originally published by our partner, MetalCraft.

Ok, so you have equipment and assets and you don’t want to worry about the tags falling or peeling off. What is the best way to apply your asset tags so they stay attached no matter what you throw at them Lets walk through the 3 Metalcraft tips that will give your asset id tags and rfid tags a strong bond to the surface of your prodct.

1. Clean the Surface

Always, always, always clean the surface before you apply the label. Basically, if you apply a tag with adhesive to a dirty surface you are going to be reapplying that tag sooner rather than later. Make sure all the usual suspects are removed: grease, oil, wax, moisture, mold or dirt and the surface is completely dry before you place the tag.

2. Handle With Care

Pressure sensitive adhesives on the back side of labels should only be handled by the edges. As soon a finger or other object has touched the adhesive it has already lost some of its ability to bond well to the surface you are placing it on, so really try not to touch the backside of the tag before to have it placed on the asset.

3. Bond Product

Make sure you apply asset tags with firm even pressure and make sure all edges have a secure seal and are laying flat. Also, if possible, the bond should set for at least 72 hours before the tag is washed or the item is exposed to any harsh conditions. In addition to bond times, it’s best to try and apply the label when the surface temperature is above 50°F.

Comments

    This post does not have any comments yet.

    Leave a Comment

    Your comment will be submitted for approval before it is posted.